Pay attention to problems before installing Winbond LCD splicing screen
The LCD splicing screen is an industrial-grade high-end display device. Its unique liquid crystal display material is made with excellent craftsmanship and exquisite workmanship. Below, let's learn about the preparations for the installation of the LCD splicing screen.
1. Power supply:
Be sure to use a protected single-phase three-wire AC 220V power supply, and ensure that the entire engineering system uses the same protection; no unprotected power supply can be used, and the grounding pin of the power cord cannot be damaged.
2. Power failure:
When it is necessary to move equipment or other work that requires power off, turn off all power, including the power switch, unplug the power plug, etc., to ensure the safety of maintenance personnel, users, and equipment.
Do not place items on cables such as power cables, signal cables, and communication cables. Avoid stepping on or squeezing the cables to prevent leakage or short circuit.
4. Cooling holes:
There may be openings on the outer surface of the device for heat dissipation. Do not block these openings to avoid heat accumulation, damage to device components, or fire hazards.
5. Signal line connection:
When plugging or unplugging the signal cable from the device, the device needs to be powered off to avoid damage to the device (because the damage caused by plugging and unplugging is not covered by the warranty).
6. Equipment operating environment:
The working environment of the equipment should be dust-proof and moisture-proof, especially to prevent liquid immersion and splashing into the equipment.
7. Equipment placement:
The equipment should be placed reasonably; for example, it is installed in a standard rack, cabinet, cabinet, or placed on a stable and flat work surface to prevent the equipment from falling and causing damage to it.
All maintenance work should be completed by professional technical maintenance personnel. Untrained users should not try to repair the equipment by themselves. To prevent the risk of electric shock, do not open the case for maintenance without authorization.